University of Missouri-Rolla

Dr. John J. Myers, P.E.

Department of Civil, Architectural, and Environmental Engineering

University of Missouri-Rolla

1870 Miner Circle

325 Butler Carlton Hall

Rolla, Missouri 65409-0030

Voice: (573) 341-6618

Fax: (573) 341-6215 or (573) 341-4729

PUBLICATIONS

JOURNAL PUBLICATIONS UNDER DEVELOPMENT:

Myers, J.J., Koenigsfeld, D. “Secondary Reinforcement for FRP Reinforced Concrete Panels,” American Concrete Institute Materials Journal, In Progress.

Myers, J.J., Ekenel, M. “Behavior of FRP Bonded Laminates with Defects and Environmental Conditioning Under Sustained Loading and Fatigue,” American Society of Civil Engineering – Journal of Bridge Engineering, In Progress.

Myers, J.J., Carney, P. “Static and Blast Resistance of Unreinforced Masonry Wall Connections Strengthened with Fiber Reinforced Polymers,” Architectural Engineering Institute Journal, In Progress.

Yang, Y., Myers, J.J., “Thermal Behavior of High Strength Concrete Bridge Girders with Bent Continuity,” American Society of Civil Engineering – Journal of Bridge Engineering, In Progress.

Myers, J.J., Shen, Ji, “Guidelines for Match Curing Technology based on Surface Area-to-Volume Ratio and Accelerated Curing”, Prestressed / Precast Institute Journal, In Progress.

Myers, J.J., Khataukar, A., “Performance of FRP-Concrete Bond Subjected to Environmental Conditioning During the Installation Process”, American Society of Civil Engineering – Journal of Materials in Civil Engineering, In Progress.

Myers, J.J., Micelli, F., Murthy, S. “Combined Environmental Effects on Concrete-FRP Bond under Various Levels of Sustained Loading”, American Concrete Institute Materials Journal, In Progress.

Myers, J.J., Stone, D., “A Simplified Thermal Stress Analysis Approach Developed for the Practicing Bridge Engineer,” Prestressed / Precast Concrete Institute Journal, In Progress.

Myers J.J., Yang X., Nanni, A. “An Assessment of Flexural Behavior of CFRP Prestressed Beams Subjected to Incremental Static Loading,” American Society of Civil Engineering – Journal of Composites for Construction, In Progress.

REFEREED JOURNAL PUBLICATIONS:

Myers, J.J., Shen, Ji, “Effect of Surface Area-to-Volume Ratio and Accelerated Curing on the Mechanical Properties of High Strength Concrete”, American Concrete Institute Materials Journal, Manuscript Submitted for Consideration July 2003.

Myers, J.J., Belarbi, A. El-Domiaty, K.A., “Blast Resistance of Un-reinforced Masonry Infill Walls With and Without Arching Action Retrofitted with Fiber Reinforced Polymers,” The Masonry Society Journal, Boulder, Colorado, Publication Submitted for Consideration July 2003.

Micelli, F., Myers, J.J., “Durability of FRP-Confined Concrete Cylinders,” European International: Journal Mechanics of Composite Materials, St., Riga, Latvia; Submitted for Consideration April 2003.

Akuthot, B., Hughes, D., Zoughi, R., Myers, J.J. Nanni, A., “Near-Field Microwave Detection of Disbond in Fiber Reinforced Polymer Composites Used for Strengthening Concrete Structures and Disbond Repair Verification,” American Society of Civil Engineering – Journal of Materials in Civil Engineering, Accepted July 2003.

Yang, Y., Myers, J.J., “Live Load Test Results of Missouri’s First High Performance Concrete Superstructure Bridge,” National Research Council, Transportation Research Record – Journal of the Transportation Research Board, Washington D.C., 12 Pages, Accepted for Journal Publication – January 2003.

Myers J.J., Yang Y., “Practical Issues for the Application of High Performance Concrete to Highway Structures,” American Society of Civil Engineering – Journal of Bridge Engineering, Volume 6, Number 6, November/December 2001, pp. 613-627.

Maerz, N.H., Nanni, A., Myers, J.J., Galecki, G., “Laser Profilometry for Concrete Substrate Characterization Prior to FRP Laminate Application,” International Concrete Repair Institute, Concrete Repair Bulletin, Volume 14, Number 1, March / April 2001.

Myers, J.J., “Permeability Performance of High Performance Concrete Subjected to Various Curing Regimes,” National Research Council, Transportation Research Record – Journal of the Transportation Research Board, Washington D.C., No. 1775, Concrete 2001, pp. 77-89.

Maerz, N.H., Chepeur, C., Myers, J.J., Linz, J., “Concrete Roughness Characterization Using Laser Profilometry for Fiber-Reinforced Polymer Sheet Application,” National Research Council, Transportation Research Record – Journal of the Transportation Research Board, Washington D.C., No. 1775, Concrete 2001, pp. 132-139.

Myers, J.J., Carrasquillo, R.L., “Influence of Hydration Temperature on the Durability and Mechanical Property Performance of HPC Prestressed / Precast Beams,” National Research Council, Transportation Research Record – Journal of the Transportation Research Board, Washington D.C., No. 1696, Vol. 1, Publication 5B0038, April 2000, pp. 131-142.

REFEREED SPECIAL PUBLICATIONS:

Myers, J.J., Carrasquillo, R.L., “Production of High-Strength Concrete In Texas Bridges,” American Concrete Institute, Detroit, MI, American Concrete Institute Special Publication TBA, Paper Submitted Fall 1999, SP Publication TBA.

Myers, J.J., Carrasquillo, R.L., “Mix Proportioning for High-Strength HPC Bridge Beams,” American Concrete Institute, Detroit, MI, American Concrete Institute Special Publication 189, Fall 1999, pp. 37-56. 2nd Place – 2001 ACI Construction Practice Award Paper

Lawrence, L., Myers, J.J., Carrasquillo, R.L., “Premature Concrete Deterioration in Texas Department of Transportation Precast Elements,” American Concrete Institute, Detroit, MI, American Concrete Institute Special Publication 177, Spring 1999, pp. 141-158.

PEER REVIEWED PUBLISHED INTERNATIONAL CONFERENCE PROCEEDINGS:

Ekenel, M., Myers, J.J., “Optimization and Durability of High Strength / High Performance Concrete Produced by Locally Available Materials of the State of Missouri,” Proceedings for the Transportation Research Board Annual Meeting, Washington DC, January 2004, xx Pages, Paper to be Submitted August 2003.

Yang, Y. Myers, J.J., Thermal Behavior of Missouri’s First High Performance Concrete Superstructure Bridge,” Proceedings for the High Performance Concrete 3rd International Symposium Sponsored by Prestressed /Precast Concrete Institute 2003 Annual Meeting Orlando, FL, October 19-22, 2003, 14 Pages, Submitted June 2003.

Myers, J.J., Shen, J., Effect of Surface Area to Volume Ratio and Accelerated Curing on the Behavior of High Strength Concrete,” Proceedings for the High Performance Concrete 3rd International Symposium Sponsored by Prestressed /Precast Concrete Institute 2003 Annual Meeting Orlando, FL, October 19-22, 2003, 11 Pages, Submitted June 2003.

Liu, X., Nanni, A., Silva, P., Myers, J.J. “FRP Confined High-Expansive Light-Weight Concrete”, Proceedings of the 2003 Composite in Construction (CCC 2003), Italy 2003; Abstract Accepted/Paper Submitted.

Micelli, F., Myers, J.J., La Tegola, A. “Environmental Effects On RC Beams Strengthened with Near Surface Mounted FRP Rods”, Proceedings of the 2003 FRPRCC VI International Conference, Singapore, Abstract Accepted/Paper Submitted.

Yang, Y., Myers, J.J., “Live Load Test Results of Missouri’s First High Performance Prestressed Precast Concrete Superstructure Concrete Bridge,” Proceeding for the 2002 Precast / Prestressed Concrete Institute Convention/FHwA-NCBC Concrete Bridge Conference, Nashville, TN, October 6th-9th, 2002, 6 pages.

Myers, J.J., Belarbi, A., El-Domiaty, K.A., “Blast Resistance of Un-reinforced Masonry Walls Retrofitted with Fiber Reinforced Polymers,” Proceedings for The 9th North American Masonry Society 2003 Annual Meeting, CD Rom, Clemson, South Carolina, June 1st-4th, 2003, 12 pages - Honorable Mention 9NAMS Best Paper Award.

Belarbi, A., Myers, J.J., Puliyadi, S. “Evaluation of Lap Splice Length Requirement of CFRP Sheets in RC Beams under Fatigue Loads”, Proceedings of the Second International Conference (CDCC 02) “Durability of Fiber Reinforced Polymer (FRP) Composites for Construction”, Editors – Brahim Benmokrane, Ehab El-Salakawy, Montreal, Quebec, Canada, May 29th-31st, 2002, pp. 701-711.

Stone, D., Koenigsfeld, D, Myers, J.J., Nanni, A., “Durability of GFRP Rods, Laminates, and Sandwich Panels Subjected to Various Environmental Conditions”, Proceedings of the Second International Conference (CDCC 02) “Durability of Fiber Reinforced Polymer (FRP) Composites for Construction”, Editors – Brahim Benmokrane, Ehab El-Salakawy, Montreal, Quebec, Canada, May 29th-31st, 2002, pp. 213-224.

Micelli, F., Myers, J.J., Murthy, S. “Performance of FRP Confined Concrete Subjected To Accelerated Environmental Conditioning”, Proceedings of the Second International Conference (CDCC 02) “Durability of Fiber Reinforced Polymer (FRP) Composites for Construction”, Editors – Brahim Benmokrane, Ehab El-Salakawy, Montreal, Quebec, Canada, May 29th-31st, 2002, pp. 87-98.

Murthy, S., Myers, J.J., Micelli, F., “Environmental Effects on Concrete-FRP Bond under Various Degrees of Sustained Loading”, Proceedings of the Second International Conference (CDCC 02) “Durability of Fiber Reinforced Polymer (FRP) Composites for Construction”, Editors – Brahim Benmokrane, Ehab El-Salakawy, Montreal, Quebec, Canada, May 29th-31st, 2002, pp. 333-346.

Shen, X., Myers, J.J., Maerz, N., Galecki, G., “Effect of Surface Roughness on the Bond Performance Between FRP Laminates and Concrete”, Proceedings of the Second International Conference (CDCC 02) “Durability of Fiber Reinforced Polymer (FRP) Composites for Construction”, Editors – Brahim Benmokrane, Ehab El-Salakawy, Montreal, Quebec, Canada, May 29th-31st, 2002, pp. 607-616.

Galicki, G., Marez, N., Nanni, A., Myers, J.J., “Limitations to the Use of Waterjets in Concrete Substrate Preparation,” Proceedings of 2001 WJTA American Waterjet Conference, Editor - Mohamed Hashish,  Minneapolis, Minnesota, USA, August 18-21, 2001, pp. 483-493.

Hughes, D., Kazemi, M., Marler, K., Zoughi, R., Myers, J.J., Nanni, A., “Microwave Detection of Delanminations Between Fiber Reinforced Polymer (FRP) Composite and Hardened Cement Paste,” Proceedings for the 28th Qualitative Nondestructive Evaluation Conference, Brunswick, Maine, July 29-August 3, 2001.

Silva, P., Myers, J.J, Belarbi, A., El-Domiaty, K., Tumialan, G., and Nanni, A., “Performance of Infill URM Wall Systems Retrofitted with FRP Rods and Laminates to Resist In-Plane and Out-of-Plane Loads,” Proceedings of the Ninth International Conference and Exhibition on Structural Faults and Repair, London, UK, July 4-6, 2001. 12 pages, Published in CD-ROM.

Puliyadi, S., Belarbi, A., Myers, J.J., “Performance of CFRP Strengthened Reinforced Concrete (RC) Beams in the presence of Delaminations and Lap Splices under Fatigue Loading,” Proceedings of the International Conference on Composites in Construction (CCC-2001), Porto, Portugal, October 10-12, 2001, pp. 323-328.

Li, T., Silva, P., Belarbi, A., Nanni, A., Myers, J.J.,Retrofit of Un-Reinforced Infill Masonry Walls with FRP,” Proceedings of the International Conference on Composites in Construction (CCC-2001), Porto, Portugal, October 10-12, 2001, pp. 559-563.

Stone, D., Nanni, A., Myers, J.J. “Field and Laboratory Performance of FRP Bridge Decks”, Proceedings of the International Conference on Composites in Construction (CCC-2001), Porto, Portugal, October 10-12, 2001, pp. 701-706.

Myers, J.J., Murthy, S. Micelli, F., “Effect of Combined Environmental Cycles on the Bond of FRP Sheets to Concrete,” Proceedings of the International Conference on Composites in Construction (CCC-2001), Porto, Portugal, October 10-12, 2001, pp. 339-344.

Micelli, F., Myers, J.J., Murthy, S. “Effect of Environmental Cycles on Concrete Cylinders Confined with FRP,” Proceedings of the International Conference on Composites in Construction (CCC-2001), Porto, Portugal, October 10-12, 2001, pp. 317-322.

Myers, J.J. “The Use of the Maturity Method as a Quality Control Tool for High Performance Concrete Bridge Decks,” Proceedings for the PCI/FHWA/FIB International Symposium on High Performance Concrete, September 25-27, 2000, pp 316-330.

Nanni, A., Belarbi, A., Myers, J.J. “Use of FRP Composites for the Strengthening of Concrete Bridges in Missouri,” ACI Fall 2000 Convention Proceedings, Ontario, Canada, October 15-20, 2000.

Haung, P., Myers, J.J., Nanni, A., “Dapped-End Strengthening in Precast Prestressed Concrete Double Tee Beams with FRP Composites,” Proceedings for the 3rd ACMBS International Conference On Advanced Composite Materials in Bridges and Structures, Ottawa, Canada, J. Humar and A.G. Razaqpur, Editors, August 2000, pp. 545-552.

Myers, J.J., Carrasquillo, R.L., “Quality Control & Quality Assurance Program for Precast Plant Produced High Performance Concrete U-Beams,” Proceedings for the PCI/FHWA International Symposium on High Performance Concrete, Advanced Concrete Solutions for Bridges and Transportation Structures, New Orleans, Louisiana, October 1997, pp. 368-382.

Myers, J.J., Touma, W., Carrasquillo, R.L., “Permeability of High Performance Concrete: Rapid Chloride Ion Test vs. Chloride Ponding Test,” Proceedings for the PCI/FHWA International Symposium on High Performance Concrete, Advanced Concrete Solutions for Bridges and Transportation Structures, New Orleans, Louisiana, October 1997, pp. 268-282.

Myers, J.J., Carrasquillo, R.L., “Material and Mechanical Properties of Texas High Performance Concrete Bridges,” Proceedings for USA - Australia Workshop on High Performance Concrete (HPC), Sydney, Australia, August 1997, pp. 169-183.

PEER REVIEWED PUBLISHED CONFERENCE PROCEEDINGS:

Worsey, P., Myers, J.J., Smallwood, J. Post 9-11 Effect on Engineering Education at UMR,” Proceedings for the Midwest ASEE 2003 Annual Conference, Rolla, MO, September 2003, xx Pages, Abstract Accepted, Submitted June 2003.

Carney, P., Myers, J.J., Shear and Flexural Strengthening of Masonry Infill Walls with FRP for Extreme Out-of-Plane Loading,” Proceedings for the Architectural Engineering Institute 2003 Annual Meeting Austin, TX, September 2003, 7 Pages, Submitted May 2003.

Yang, Y., Myers, J.J., “Live Load Test Results of Missouri’s First High Performance Concrete Superstructure Bridge,” Proceedings for the Transportation Research Board 2003 Annual Meeting Washington, D.C., January 2003, 12 Pages.

Myers, J.J., “Comparative Study on the Production of Field Produced High Performance Concrete,” Proceedings for the Transportation Research Board 2002 Annual Meeting, Washington, D.C., January 2002, 22 Pages, Published in CD-ROM.

Yang, Y., Shen, J., Myers, J.J., “Instrumentation Plan and Early-Age Monitoring of High Performance Concrete Bridge Girders in Missouri,” Proceedings for the Transportation Research Board 2002 Annual Meeting Washington, D.C., January 2002, 11 Pages, Published in CD-ROM.

Myers, J.J., “Permeability Performance of High Performance Concrete Subjected to Various Curing Regimes,” Proceedings for the Transportation Research Board 2001 Annual Meeting, Washington, D.C., January 8, 2001, 15 Pages, Published in CD-ROM.

Lawrence, L., Myers, J.J., Carrasquillo, R.L., “Internal Sulfate Attack in Texas Department of Transportation Precast Elements,” Proceedings for ASTM Symposium on Internal Sulfate Attack, San Diego, California, December 1997, 10 pages.

Myers, J.J., Carrasquillo, R.L., “The Role of Aggregates in the Production of High Performance Concrete U-Beams,” ICAR Annual Meeting, Austin, Texas, Aggregates, Bases, and Fines, April 1997, pp. H-2-1 to H-2-13.

PUBLISHED CONFERENCE PROCEEDINGS (Individual Peer Reviewed):

Annaiah R., Myers, J.J., Nanni, A. “An Assessment of In-Situ FRP Shear and Flexural Strengthening of Reinforced Concrete Joists,” Proceedings for the ASCE 2000 Structures Congress, Philadelphia, PA, May, 2000, 14 Pages, Published in CD Rom.

Tumilalan, G., Tinazzi, D., Myers, J.J., Nanni, A. “An In-Situ Evaluation of FRP Strengthened Unreinforced Masonry Walls Subjected to Out-Of-Plane Loading,” Proceedings for the ASCE 2000 Structures Congress, Philadelphia, PA, May, 2000, 14 Pages, Published in CD Rom.

OTHER PUBLICATIONS (Peer Reviewed)

Myers, J.J., Maerz, N.H. “Concrete Roughness Characterization Using Laser Profilometry for Fiber-Reinforced Polymer Sheet Application,” American Concrete Institute, Concrete International – Magazine of the American Concrete Institute – An International Technical Society, In Progress.

Myers, J.J., “How to Achieve a Higher Modulus of Elasticity,” Publication – HPC Bridge Views, FHWA Sponsored, NCBC Co-Sponsored Newsletter, Issue No. 5, Sept/Oct 1999.

Myers, J.J., Carrasquillo, R.L. “Effect of Curing Temperature on Compressive Strength Development,” Publication – HPC Bridge Views, FHWA Sponsored, NCBC Co-Sponsored Newsletter, Issue No. 2, March/April 1999.

OTHER PUBLICATIONS (Non-Peer Reviewed)

Myers, J.J., Yang, Y., Shen, J., “Early-Age And Later-Age Monitoring Of High Performance Bridges In Missouri,” Conference Paper for the 2001 ACI Fall Convention, Dallas, TX, October 28, 2001. 

Myers, J.J., Maerz, N., Shen, X., “Laser Profilometry for Concrete Roughness Characterization for Externally Bonded Fiber Reinforced Laminates,” Conference Paper for the 2001 Joint ASME-ASCE Mechanics and Materials Conference, San Diego, CA, June 29, 2001, 8 pages.

Myers, J.J., “High Performance Concrete Bridges in Missouri – Bridge A6130,” Publication – BRIDGE – The Newsletter of the Department of Civil Engineering, University of Missouri – Rolla, Volume 17, Number 2, April 2001, pp.1-3.

TECHNICAL REPORTS

Carney, P., Myers, J.J., “Static and Blast Resistance of FRP Strengthened Connections for Unreinforced Masonry Walls,” Center for Infrastructure Engineering Studies,” Preliminary Draft Report Number 03-46, June, 2003.

Koenigsfeld, D., Myers, J.J., “Secondary Reinforcement for Fiber Reinforced Polymer Concrete Panels,” Center for Infrastructure Engineering Studies,” Preliminary Draft Report Number 03-45, June, 2003.

Myers, J.J., Shen, X., “Effect of Surface Roughness and Putty Thickness on the Bond Performance of FRP Laminates,” Center for Infrastructure Engineering Studies,” Preliminary Draft Report Number 03-41, October, 2002.

Myers, J.J., Shen, J., “The Influence of Surface Area-To-Volume And Accelerated Curing on the Quality Control of High Strength Concrete,” Center for Infrastructure Engineering Studies,” Preliminary Draft Report Number 03-39, September, 2002.

Myers, J.J., Yang, Y. “Interim Report for High Performance Concrete for Bridge A6130,” Center for Infrastructure Engineering Studies,” Preliminary Draft Report Number 02-30, September, 2002.

Murthy, S., Myers, J.J., “Durability Report of Externally Strengthened FRP Concrete,” Center for Infrastructure Engineering Studies,” Preliminary Draft Report Number 03-40, March, 2002.

El-Domiaty, K.A., Myers, J.J., Belarbi, A. “Blast Resistance of Un-reinforced Masonry Walls Retrofitted with Fiber Reinforced Polymers,” Center for Infrastructure Engineering Studies, Preliminary Draft Report Number 02-28, March, 2002.

Pulyadi, S., Belarbi, A., Myers, J.J., “Performance of CFRP Sheet Strengthened Reinforced Concrete Beams In The Presence of Delamination and Lap Splice,” Center for Infrastructure Engineering Studies, Preliminary Draft Report Number 02-26, February, 2002.

Bae, S.W., Belarbi, A., Watkins, S., Myers, J.J., “A Field Study on Delamination of CFRP Laminates and Fiber Optic Sensor Application on Bridge A3050,” Department of Civil Engineering, The University of Missouri-Rolla, Rolla, Missouri, July 2001.

Micelli, F., Myers, J.J., Murthy, S., “Durability of Concrete Cylinders Wrapped with GFRP and CFRP,” Center for Infrastructure Engineering Studies, Preliminary Draft, Report Number 00-23, June, 2001.

Myers, J.J.,Instrumentation Plan for High Performance Concrete Bridge A6130 – Route 412 Pemiscot County, Missouri,” Center for Infrastructure Engineering Studies, Report Number 00-21, May, 2001.

Maerz, N., Myers, J.J., “Final Technical Report: Development of a Prototype Imaging Concrete Roughness Measurement Device,” Center for Infrastructure Engineering Studies, Report Number 00-20, April, 2001.

Myers, J.J., Gopalaratnam, V., Nanni, A., Stone, D., Earney, T.P., “Precast I-girder Cracking: Causes and Design Details,” Center for Infrastructure Engineering Studies and Missouri Department of Transportation Research, Development, and Technology Report Number 00-06, January 2001.

Chepur, P., Maerz, N., Myers, J.J., “Concrete Roughness Profile Characterization Using Laser Profilometry for Improved Bond Strength with Fiber Reinforced Polymers,” Center for Infrastructure Engineering Studies, Report Number 00-19, June, 2000.

Myers, J.J., Nanni, A. Stone, D. “Investigation of Cracking In Continuous Prestressed Concrete I-Girder Bridges,” Center for Infrastructure Engineering Studies, Report Number 00-18, March, 2000.

Huang, P.C., Nanni, A., Myers, J.J., “Dapped-End Strengthening of Precast Prestressed Concrete Double Tee Beams with FRP Composites,” Center for Infrastructure Engineering Studies, Draft Report Number 99-15, December, 1999.

Tumialan, J.G., Myers, J.J., Nanni, A., “Field Evaluation of Masonry Walls Strengthened with FRP Composites at the Malcolm Bliss Hospital,” Center for Infrastructure Engineering Studies, Report Number 99-12, December, 1999.

Annaiah, R., Myers, J.J., Nanni, A., “In-Situ Shear and Flexure Strengthening of Reinforced Concrete Members with Advanced Composites,” Center for Infrastructure Engineering Studies, Draft Report Number 99-11, December, 1999.

Myers, J.J., Carrasquillo, R.L. “The Production and Quality Control of High Performance Concrete in Texas Bridge Structures,” Center for Transportation Research, Preliminary Report Number 580-589-1, Submitted November 1999.

Annaiah, R., Nanni, A., Myers, J.J. “In-Situ Shear and Flexure Strengthening of Reinforced Concrete Beams with Composites,” Center for Infrastructure Engineering Studies, Report Number 99-09, June, 1999.

Myers, J.J. “Evaluation of Confined Lap-Splice Connection for Precast Construction,” Master’s Thesis, Department of Civil Engineering, The University of Texas at Austin, Austin, Texas, May 1994.

REFERENCE MANUALS OR TEXTBOOKS

Myers, J.J. “SOTA FRP Retrofited Masonry Structures Document-Chapter 6” ACI Committee 440M, Detroit, MI, In Progress

Hamilton, H.R. III, Myers, J.J. “Durability of FRP Systems Document-Chapter 3” ACI Committee 440L, Detroit, MI, In Progress

Myers, J.J. “SOTA High Strength Concrete Document-Chapter 5” ACI Committee 363, Detroit, MI, Under Review Process July 2003.

Carrasquillo, R.L., Myers, J.J. “SHRP High Performance Concrete Showcase Manual - Chapter 4, Mix Proportioning Part I; Chapter 5, Mix Proportioning Part II; Chapter 7, Precast / Prestressed Concrete Construction; & Chapter 8, Jobsite Construction” Houston, TX March 1996.

Web Page Last Updated 7/27/03