Equipment List for Materials Testing Laboratory

Instron 4469 electro-mechanical UTM

Capacity	50 kN (11,250 lb)
Speed Range	0.001 to 500 mm/min (0.00004 to 20 in/min)
Maximum Crosshead Travel	1135 mm (44.7 in)
Horizontal Test Space	420 mm (16.5 in)
Serial Number	C2787
Missouri S&T Inventory Number	70097
Acquisition Date (original system)	November 5, 1996
Acquisition Price (original system)	$48,042
Acquisition Price (including added accessories)	$84,224
Last Calibration	August 21, 2002

Original Accessories

• 4469 load frame, 50 kN
• 2525-802 tension/compression load cell, 50 kN (10,000 lb)
  • last calibration August 21, 2002
  • ordered replacement cell on 5-10-06 for $4964
  • ordered replacement cell on 12-29-08 for $5805 ($6450 with 10% discount), SN 64797
• 2501-090 tension coupling, type 1 to D
• 2716-002 wedge action grips, 20,000 lb
• 2703-001 flat serrated grip faces, for flat specimens 1" wide x 0 to 0.25" thick, 16 teeth per inch, 50kN capacity
• 2810-182 3-point bend fixture, 100 kN, span 30-250 mm, roller diameters 25 mm, maximum sample width 250mm, purchased January 17, 1997
• 2501-073 adapter, load cell type 1
• 2501-173 adapter, type D to type ?
• 2910-052 protective shield
• 2410-160 Series IX software and machine interface
• 2430-024 National Instruments PC IIA GPIB board

Accessories Added Later

• 2910-056 load frame support table, 1500 lb capacity, 3'x5'x30", $790
• 2601-064 LVDT deflection sensor, range +/- 50 mm (2 in), accuracy approximately +/- 0.018", approx. $166
• Gateway computer, Missouri S&T No. 70098, SN 0006413967, purchased January 6, 1997, $1813
• 2703-008 vee grip faces for 1/8 to 5/16" diameter round specimens, 25 teeth per inch straight serrations, 50kN capacity, purchased February 10, 1997, $1320
• 2210-865 strain conditioner, purchased May 19, 1997, $1830
• 2630-110 extensometer, GL 1", +100%, -10% strain, +/- 0.0004" or better, purchased May 19, 1997, $2760 (okay to 200-deg C)
• custom 6.5" diameter compression platens, made in-house
• 2910-052 extra protective shield for back of machine, purchased February 2001, $530
• TCC 8-24-24 5x10 VP Satec thermal chamber, SN C1071, -250F to 500F, purchased April 14, 1999, approx. $10,000
  • W-C903-D chamber roller bearing sliding mounting $1500
  • W-C903-E removable load train port inserts, $1360
  • 3119-301 lower pullrod, 100 kN, $460
  • 3110-716 push/pullrod, 100 kN, $440
  • 2501-521 push/pullrod, $1200
  • 3110-711 push/pullrod, $620
  • 2810-185 upper roller, $124
  • 2810-186 upper roller, $124
  • 2810-188 lower roller and anvil set, $662
  • 2810-189 lower roller and anvil set, $662
  • custom stand, built in-house
• 2501-163 compression anvil, 150 mm (6 in) diameter, 100 kN, purchased September 27, 2000, $780
• 2501-084 compression anvil, 150 mm (6 in) diameter, 100 kN, purchased September 27, 2000, $780
• Bluehill software v1.5, National Instruments PCI-GPIB board, and Dell PC upgrade in March 2005, $6000
• Bluehill software v2 upgrade in September 2009, $580
• Dell Optiplex 790, P1911 monitor, June 2011, $707
• Bluehill software v2 upgrade for 64-bit in June 2012, $516

Maintenance

• motor replaced April 2000 with 500400056 motor assy, C40-B-300X from Magmotor Corporation, $567
• 1" extensometer repaired in February 1998 by Instron, $1200

Tinius Olsen Lo-Cap electro-mechanical UTM

Capacity	12 kips
Serial Number	150370
Missouri S&T Inventory Number	61934
Acquisition Date	June 15, 1987
Acquisition Price	$28,455
Last Calibration	August 21, 2002

Accessories

• one set of flat serrated grips
• one set of vee serrated wedge grips
• one set of compression platens

Instron 5583 electro-mechanical UTM

Capacity	150 kN (30 kips)
Serial Number	11233H
Missouri S&T Inventory Number
Acquisition Date	January 21, 2003 (used, from Lemay Center in St. Louis, Missouri)

Accessories

• 2630-115 static extensometer, SN 23, GL 2", travel +1/-0.1", last calibrated November 24, 1993
• 2512-425 load cell, SN 055, last calibrated December 11, 1993
• 2525-818 load cell, SN UK23, +/- 2kN, last calibrated July 9, 1993
• M10-82716-1 Manual Wedge Grips
• T1122-1029,1031 three-point flexure fixture, 100 kN, 1" diameter anvils
• (2) 8000-031 load string adaptor kit, type 2, purchased November 5, 1993
• Merlin software and computer upgrade, purchased March 7, 2001

 

Instron 4485 electro-mechanical UTM

Capacity	200 kN (45,000 lb)
Speed Range	0.001 to 500 mm/min (0.00004 to 20 in/min)
Serial Number	C4315
Missouri S&T Inventory Number	72253
Acquisition Date (original system)	May 20, 1998 (new)
Acquisition Price (original system)	$76,228
Acquisition Price (including added accessories)	$106,466
Last Calibration	August 28, 2002

Original Accessories

• 2525-172 load cell, SN UK53
  • last calibration July 31, 1998; August 28, 2002
• pneumatic grips
  • 0-0.79" x 3" tension grip faces accommodating flat specimens up to about 30" long, 200kN capacity
  • 0.24-0.70" diameter tension grip faces accommodating specimens up to about 30" long, 200kN capacity
• 5 7/8" diameter compression platens, 100kN capacity
• 2630-114 extensometer, GL 2", +/-10% strain, +/- 0.0004" or better
  • last calibration May 2, 1998
• Series IX control and data acquisition system

Accessories Added Later

• Gateway computer, $2969
• 2630-110 extensometer, GL 1", +100%, -10% strain, +/- 0.0004" or better, purchased September 27, 2000, $2840
• 2640-008 2.5 mm travel, 15 mm GL, transverse strain sensor, purchased September 27, 2000, $2610
  • last calibration November 9, 2000
• 2601-065 LVDT deflection sensor, range +/- 100 mm (4 in), accuracy approximately +/- 0.036", purchased September 27, 2000, $1560
• 2601-069 magnetic base LVDT holder, purchased September 27, 2000, $1140
• S1-14853 4400 console with second strain option and 2210-867 dual strain data option, purchased September 27, 2000, $7809
• 2210-865 strain conditioner, purchased September 27, 2000, $2000
• 2910-062 protective shield for back of machine, purchased February 2001, $550
• Bluehill software v1.5, National Instruments PCI-GPIB board, and Dell PC upgrade in March 2005, $6000
• Bluehill software v2 upgrade in September 2009, $580
• 2501-071 Compression Platen (Anvil), 150 mm (6 in) Diameter. Type Im LH (M30 x 2). Capacity: 100 kN, February 14, 2011, $1349
• Dell Optiplex 790, P1911 monitor, June 2011, $707
• Bluehill software v2 upgrade for 64-bit in June 2012, $516

Tinius Olsen Super-L hydraulic UTM

Capacity	60 kips
Serial Number	129605
Missouri S&T Inventory Number	57896
Acquisition Date	January 7, 1980
Acquisition Price	$16,330
Last Calibration	August 21, 2002

Accessories

• one set of flat serrated wedge grips
• three sets of vee serrated wedge grips
• C-2 Tinius Olsen crosshead motion detector, SN 156428, Missouri S&T #63311, purchased June 12, 1989, $2030
  • last calibration December 19, 1990
• C-2 Tinius Olsen crosshead motion detector, SN 156426, Missouri S&T #64184, purchased January 21, 1991, $2045

 

Tinius Olsen Super-L servo-hydraulic UTM

Capacity	60 kips
Serial Number	128505
Missouri S&T Inventory Number	57869
Acquisition Date	November 27, 1979
Acquisition Price	$28,880
Last Calibration	August 21, 2002

Accessories

• one set of vee serrated wedge grips

Tinius Olsen Super-L UTM

Capacity	120 kips
Serial Number	84540
Missouri S&T Inventory Number	49421
Acquisition Date	January 4, 1965
Acquisition Price	unknown
Last Calibration	unknown

UTM Accessories

• S-1,000-8 AB Tinius Olsen extensometer, Missouri S&T No. 57922, SN 129968, purchased January 16, 1980, $1485
  • last calibrated December 19, 1979
• Cal-60 Tinius Olsen linear motion calibrator, Missouri S&T No. 57925, SN 128890-2, purchased January 16, 1980, $1895
  • last calibrated October 5, 1979
• D-4 Tinius Olsen deflectometer, Missouri S&T No. 49998, SN 105624, purchased June 20, 1972
  • last calibrated June 16, 1972
• S-20-1 Tinius Olsen S-type extensometer, SN 99840
• S-400-2A Tinius Olsen 2" extensometer, SN 100482
• S1 Tinius Olsen 2" extensometer, SN 82012
• S-40-2 Tinius Olsen S-type extensometer, Missouri S&T No. 57924, SN 126095, purchased January 16, 1980, $1585
  • last calibrated December 19, 1979
• Tinius Olsen 6" compressometer parallel-to-grain with 0.0001"x0.1" dial gage, Missouri S&T No. 21842, SN 54949
• (2) custom 8" extensometer with 0.001"x0.5" dial gage
• Tinius Olsen proving ring, Missouri S&T No. 18806, SN 28416, purchased April 28, 1938
  • repaired and calibrated January 16, 1656
• Tinius Olsen 2" and 8" mechanical extensometer with 0.0001"x0.2" dial gage, Missouri S&T No. 28703, SN 82270, purchased January 25, 1965, $463
• Tinius Olsen extensometer counterbalance system
• S-1,000-2 AB Tinius Olsen extensometer, Missouri S&T No. 57923, SN 129969, purchased January 16, 1980, $1045
  • last calibrated December 19, 1979
• Tinius Olsen 0.5" and 0.625"-diameter x 0.5" wide double shear fixture
• custom 1"-diameter pumching shear fixture
• (3) 3442-BI-010 Epsilon bi-axial extensometer, 1" gage length, +/- 0.1" axial travel, +/- 0.05" transverse travel
• H.C. Berry 2", 8" and 20" mechanical strain gage
• Whittemore 2" mechanical strain gage, SN 940
• 8" mechanical extensometer 0.1"x0.001" 
• (2) 7" mechanical deflectometer with 1"x0.001" dial gage
• Tinius Olsen 2" mechanical deflectometer
• 9.25" adjustable three-point, 5/16"-diameter supports, 2"-wide specimens, 100kN-capacity
• 7" fixed three-point, 1"-diameter supports, 4"-wide specimens, unknown capacity
• 12", 16", 18", or 21" fixed four-point with 4", 5.25", or 7" center piece, 5/8"-diameter supports, 7"-wide specimens, unknown capacity
• others

Tinius Olsen Lo-Torq Torsion Tester

Capacity	10 kip-in, 5/16" to 1.5" OD, 20" long
Serial Number	129610
Missouri S&T Inventory Number	57897
Acquisition Date	January 8, 1980
Acquisition Price	$12,950
Last Calibration	January 17, 1992

Accessories

• custom troptometer

 

Tinius Olsen Bench-Top Torsion Tester

Capacity	10 kip-in
Serial Number	62181
Missouri S&T Inventory Number
Acquisition Date	February 1958
Last Calibration	January 17, 1992

Accessories

• custom digital display, installed in 1989
• custom troptometer
• Tinius Olsen troptometer

Buehler Macromet Rockwell-type Tester

Model	MRK-E 1700-1000
Serial Number	8322
Missouri S&T Inventory Number	57748
Acquisition Date	July 20, 1979
Acquisition Price	$1850
Last Calibration

Accessories

• repaired by Buehler in January 2003, $450

 

Wilson Brinell Tester

Model	J-Brinell
Serial Number	89431
Missouri S&T Inventory Number	63262
Acquisition Date	October 4, 1989
Acquisition Price	$6295
Last Calibration	August 28, 2002

Accessories

• three microscopes

 

Wilson Rockwell Tester

Model	4 JR 0
Serial Number	1463
Missouri S&T Inventory Number
Acquisition Date	surplus
Acquisition Price	unknown
Last Calibration	August 28, 2002

 

Wilson Rockwell Tester

Model	4 JR
Serial Number	4953
Missouri S&T Inventory Number
Acquisition Date	December 1976
Acquisition Price	$1680
Last Calibration	August 28, 2002

 

Wilson Rockwell Tester

Model	1 JR
Serial Number	1118
Missouri S&T Inventory Number
Acquisition Date	December 6, 2004
Acquisition Price	$100 (handling charge for MOSASP)
Last Calibration

 

Hardness Accessories

• Rockwell diamond penetrators
  • Wilson A brale, Part #3405A, SN 861761
  • Wilson C brale, Part #410C, SN 8305165
  • Wilson C brale, Part #410C, SN 80427950
  • Wilson C brale, Part #410C, SN 8501483
  • Wilson C brale, SN 871771
  • Wilson C brale, SN 71C3847
  • DKM C brale, No. 41343
  • Wilson N brale, Part #2015N, SN 7001740
  • Wilson N brale, Part #2015N, SN 7622561
  • Wilson N brale, Part #2015N, SN 8301244
  • Wilson brale, Special Part #1478, SN 1478
  • Wilson brale, Special Part #900001751, SN 1028931
• Rockwell ball penetrators
  • (7) 1/16"-diameter, Wilson, Part #7201
  • (3) 1/16"-diameter, Buehler, No. 17001020, purchased August 27, 2001, $100 each
  • (4) 1/16"-diameter, Buehler, purchased June 2012 for $476.00 total
  • (1) 3/32"-diameter
  • (1) 1/8"-diameter
  • (2) 1/4"-diameter
  • (1) 1/2"-diameter
• anvils
  • (2) 8"-diameter flat
  • (5) 2.5"-diameter flat
  • (2) 2"-diameter flat
  • (6) smaller flat (various sizes)
  • (1) diamond spot
  • (1) rounded
  • (2) 3"-diameter vee
  • (2) 1.5"-diameter vee
  • (6) smaller vee (various sizes)
  • (2) Wilson Cylindron Jr. anvil
  • Wilson gooseneck anvil No. 99804683
  • Wilson gooseneck adapter No. 1503
• test blocks
  • Brinell, 3000 KGF, 10 mm steel ball
    • 218, SN 881354
  • Rockwell B
    • 34.2 +/- 1.5
    • 82.0
    • 82.8 +/- 1.0
    • 83.8 +/- 1.0
    • 86.2 +/- 1.0
    • 93.2 +/- 1.0
  • Rockwell C
    • 24.5 +/- 1.0
    • 29.0 +/- 1.0
    • 54.1 +/- 1.0
    • 62.3 +/- 0.5
    • 62.5 +/- 0.5
    • 62.6 +/- 0.5
    • 63.1 +/- 0.5
    • 63.7 +/- 0.8
  • (5) microhardness

Portable Hardness Testers

• Fowler Instrumatic portable hardness tester
• 934-1 Barber-Coleman Co. Barcol Impressor
• PHT-2 Riehle portable hardness tester, purchased January 8, 1997, $150 (handling charge for MOSASP), $7000 (actual value)
• PHT-1 Riehle portable hardness tester, SN 5-2868, purchased January 8, 1997, $100 (handling charge for MOSASP)
• Shore type "A₂" durometer
• Shore type D durometer
• 306L PCT type A durometer, SN 8807
• 306L PCT type A durometer, SN 8793
• 302SL PCT sponge rubber gauge, SN 1453
• Shore Conveloader
• Detroit hardness tester
• Maffri Metaltest portable hardness tester
• Shore standard dial reading scleroscope, Missouri S&T No. 53698, SN 8783-D, purchased November 30, 1955
• Shore scheleroscope, SN 21396-C2

SM11 Thick-Wall Tecquipment Vessel

Capacity
Serial Number	064SM11
Missouri S&T Inventory Number	54443
Acquisition Date	June 22, 1976
Last Calibration	March 24, 1976

Overall dimensions (tray)	27.25" x 24.25"
Weight of Unit (Cylinder + hand pump + tray)	89 lbf
Pump Capacity	1/2 pint approx.
Recommended Oil	Castrol - 'Perfecto TT' (Castrol Magna 150, formerly Magna XH & Perfecto TT & Perfecto WW) (ISO 150 hydraulic fluid is approx. SAE 40 wt)
Pressure Gage Range	0-1500 psi
Pre-set Relief Valve Setting	1100 psi
Cylinder Dimensions	8" long x 6" O/Dia. x 1.5" bore
Cylinder Material	Duralumin
Maximum Allowable Test Pressure	1000 psi
Strain Gages	Wire type T.M.L.PL.3.  All strain gages on any one particular cylinder are chosen to have the same gage factor - although this gage factor may vary from cylinder to cylinder.

 

Custom Thin-Wall Vessels

Custom Lathe-Bed Beam Tester

Capacity

5 feet

Accessories

• (3) 1/2 lb weight
• (16) 1 lb weight
• (7) 2 lb weight
• (11) 5 lb weight
• (10) 10 lb weight

 

Tinius Olsen Beam Tester

Capacity	10 kips, 8 feet
Serial Number	57172
Missouri S&T Inventory Number	58387
Acquisition Date	November 23, 1955
Acquisition Price	$3725
Last Calibration	August 21, 2002

Accessories

• pulling screw replaced in September 1982, $900
• digital load indicator added in 1989

 

• 5 lb Ametek tension/compression force gage
• (2) 15 lb Unitek compression force gage
• 30 lb Ametek tension/compression force gage
• 50 lb Hunter Spring tension/compression force gage
• 50 lb Chatillon tension/compression force gage
• 100 lb Dillon compression force gage
• 250 lb Dillon tension/compression force gage (needs repair)
• 5000 lb Dillion compression force gage
• 5 lb spring scale
• 15 lb spring scale
• 1000 ft-lb Sweeney torque gage
• calibration weights (1 oz. to 10 lb.)
• calibration weights (2 g to 500 g)
• 200 lb portable tension testers with Dillon force gage
• 4000 lb PT Detroit portable tension tester, SN 988
• 4100 g E1D120 Ohaus Explorer electronic scale, SN D054025601
• Circuits and Systems Inc. 100 lb. electronic scale

• Alban lab freezer, W 26" x T 16" x H 20"
• (2) OS545 Omega infrared thermometer, purchased in 2002, $180 each
  • SN 010604715
  • SN 010604991
• (2) SP-SP-K-6 Omega type-K surface probe, with SMP connector, purchased in 2002, $73 each
• OSP100L-O Omega infrared thermometer, SN 28960, purchased January 25, 2000, $299
• HH-22 Omega thermometer, SN T-175135, purchased May 28, 1997
• 88003K Omega surface probe, purchased May 28, 1997
• KTSS-HH Omega type-K thermocouple, purchased May 28, 1997
• 19-057282 Fisher Scientific high temperature double-lined gloves, maximum temperature 399^oC (750^o F), purchased November 10, 1999, $31.12
• (5) 19-025802 Fisher Scientific grip-n-hot mill gloves, maximum temperature 204^oC (400^o F), purchased November 10, 1999, $4.95 each
• (2) E-37500-00 Cole-Parmer thermohygrometer, purchased May 27, 1997, $36.50 each

• 3800 Vishay wide range strain indicator, SN 66279, purchased December 4, 1986 
• (2) 2100 Vishay strain gage conditioner and amplifier system
  • Missouri S&T No. 64183, SN 92105, purchased October 29, 1990, $4355
  • Missouri S&T No. 64168, SN 92110, purchased October 29, 1990, $4355
• 1601 Vishay LVDT adapter, SN 23619
• 1550 Vishay strain indicator calibrator, SN 026146
• 1300 Vishay gage installation tester, SN 030475
• (8) P-3500 Vishay digital strain indicator
  • SN 130697, purchased January 25, 2000, $1475 each (seven year warranty from ship date of March 8, 2000)
  • SN 130704, purchased January 25, 2000, $1475 each (seven year warranty from ship date of March 8, 2000)
  • SN 130691, purchased January 25, 2000, $1475 each (seven year warranty from ship date of March 8, 2000)
  • SN 130693, purchased January 25, 2000, $1475 each (seven year warranty from ship date of March 8, 2000)
  • Missouri S&T No. 61952, SN 70098, purchased June 5, 1987, $1095
  • Missouri S&T No. 59560, SN 50201, purchased August 10, 1983, $1020
  • Missouri S&T No. 61951, SN 60987, purchased June 5, 1987, $1095
  • Missouri S&T No. 63418, SN 71359, purchased May 2, 1989, $1098
• (3) P-350A Vishay portable strain indicator
  • Missouri S&T No. 54570, SN 009675
  • Missouri S&T No. 59482, SN 45924, purchased June 10, 1983, $1042
  • Missouri S&T No. 59483, SN 45955, purchased June 10, 1983, $1042
• (2) SB-10 Vishay switch and balance unit
  • SN 137803, purchased January 25, 2000, $1375 (seven year warranty from ship date of March 8, 2000), sent to Vishay for repair January 14, 2003, returned February 21, 2003
  • SN 137806, purchased January 25, 2000, $1375 (seven year warranty from ship date of March 8, 2000), sent to Vishay for repair January 14, 2003, returned February 21, 2003
• (6) SB-2 Vishay switch and balance unit
  • Missouri S&T No. 59484, SN 044680
  • Missouri S&T No. 61953, SN 057839
  • Missouri S&T No. 54561, SN 009725
  • Missouri S&T No. 61954, SN 057838
  • Missouri S&T No. 63419, SN 057835
  • Missouri S&T No. 59485, SN 044682
• (2) P3 Vishay strain indicator and recorder
  • SN 183024, purchased 4/18/08, shipped 5/2/08, $1875
  • SN 183008, purchased 4/18/08, shipped 5/2/08, $1875

• AE-10 Vishay Measurements Group m-bond adhesive kit, $65
• PCT-2A Vishay Measurements Group cellophane tape, $7.50
• MN5A-2 Vishay Measurements Group m-prep neutralizer 5A, $9
• MCA-2 Vishay Measurements Group m-prep conditioner A, $9
• CEA-06-250UN-120 Vishay Measurements Group 1/4" uniaxial gage for steel, $28/box of 5 gages
• CEA-13-250UN-120 Vishay Measurements Group 1/4" uniaxial gage for aluminum, $28/box of 5 gages (for combined loading test)
• CEA-06-125TM-120 Vishay Measurements Group 1/8" biaxial gage for steel, $60/box of 5 gages (for elastic constants tension test)
• CEA-13-125TM-120 Vishay Measurements Group 1/8" biaxial gage for aluminum, $60/box of 5 gages (for elastic constants flexure test)
• CEA-06-250RA-120 Vishay Measurements Group 1/4" triaxial gage for steel, $125/box of 5 gages (for pressure vessels)
• others

• E-59820-08 Delmhorst moisture meter kit, 8-50%, SN 12743, purchased May 27, 1997, $300
• PS30K-1 Pioneer stroboscope, SN 2059
• 3091 Nicolet digital oscilloscope, Missouri S&T No. 60635, SN 86D02892, purchased October 2, 1985, $6400
• 2831 Dynascan 3 1/2 digit multimeter, SN 60-09184
• 2831 Dynascan 3 1/2 digit multimeter, SN 60-10350
• 27/FM Fluke multimeter
• 4003 Racal-Dana digital multimeter, Missouri S&T No. 58419, SN 19106, purchased January 1981
• 1950A Fluke digital counter, Missouri S&T No. 53330, SN N5029D
• LFG-1310 Leader function generator, Missouri S&T No. 61451, SN 5090039
• MA 5D BBC/Goerz Metrawatt digital multimeter
• (2) 3230 Daytronic LVDT conditioner/indicator
• (6) QS-SB3072 IAC lab tables, purchased May 28, 1997
• (3) computer enclosures with tables
• fire cabinet
• stainless cabinet
• (3) steel cabinets
• (2) display cabinets
• custom beam rack
• in-house air and steam supply
• Martindale Electric Utility Undercutter

• LT64X2 type 1900 Sybron/Thermolyne hot plate
• Vishay stress-opticon demonstration device, purchased January 25, 2000, $395
• M241 to M248 Vishay complete set of stress-opticon models, purchased January 25, 2000, $395
• other

• Nikon Optiphot microscope, SN 316028 (donated by Boeing, November 2006)
• Nikon Optiphot microscope, SN 333113 (donated by Boeing, November 2006)
• (2) optical positioner/holding fixture (donated by Boeing, November 2006)
• MVC-FD71 Sony Mavica digital camera, purchased February 15, 1999, $700
• series 700 Sunnex high efficiency halogen lamp, purchased August 26, 1985 
• 4-53021-8 Gilbaltar Quick-Set Hercules full tripod with elevator, Missouri S&T property number 54560, model 6312, $336
• AO569 American Optical Stereo Star 7-30X microscope
• 1130A American Optical Illuminator teaching microscope, SN 255098
• 2770 3M overhead projector, SN 5294762111
• (2) Colortran 300 Watt photographic light with telescoping stand
• 860H Kodak auto-focus carousel slide projector, with four carousels
• 1824-4 Porta-Trace 18"x24" portable light table, SN PT-1159A, 80 watts
• VLT32T NaArc 25"x32" light table 
• Manfrotto Super Repro Copy Stand FB46263136PA0034 -- 67600, purchased January 2014, $20
• (2) Lowel Fluo-Tec Studio 450 Phase-Dimmable Fluorescent Fixture FLS-450PHD (120VAC), purchased January 2014, $50 each
  • (8) (FC55-DT5565RS) Eiko 49312 bulbs - DT55/65/RS - 55 Watt - 4 Pin 2G11 Base - 6500K - CFL, purchased February 2014, $45 total

• (1) 4" range, 0.001" resolution dial indicator
• (1) 2" range, 0.001" resolution dial indicator
• (12) 1" range, 0.001" resolution dial indicator
• (2) 0.5" range, 0.001" resolution dial indicator
• (1) 0.25" range, 0.001" resolution dial indicator
• (1) 0.2" range, 0.0001" resolution dial indicator
• (1) 0.1" range, 0.0001" resolution dial indicator
• (2) 0.03" range, 0.0001" resolution dial indicator
• (1) 1.75" range, 0.025 mm resolution dial indicator
• (2) spring dividers
• (7) 6" x 0.001" dial calipers
• (2) 12" x 0.001" dial calipers
• (11) 12" steel rule
• (1) 24" steel rule
• (1) 24" framing square
• (2) 12" framing square
• (3) level square
• (6) 12' tape
• 12 dial indicator stands
• 20"x0.001" gage stand