Suggestions for Establishing Laboratory Similar to IDE 120

1. tension, compression, flexure
   • (1) Instron 5969 universal testing machine
   • Instron 5969 accessories
     • (1) 2716-002 manual wedge action grips
     • (1) 2703-011 serrated jaw faces
     • (1) 2703-013 V-serrated jaw faces
     • (1) 2630-113 strain gauge extensometer
     • (1) 2501-163 compression platen
     • (1) 2501-084 compression platen (check pin size)
     • (1) 2810-182 three-point bend fixture
     • (1) Bluehill 3 software - Classroom Edition
     • (1) computer
     • (1) 2910-056 support table
     • (1) computer table
   • (1) Instron 5985 universal testing machine
   • Instron 5985 accessories
     • (1) 2716-120 pneumatic wedge action grips
     • (1) 2703-180 serrated jaw faces
     • (1) 2703-182 V-serrated jaw faces
     • (1) 2630-113 strain gauge extensometer
     • (2) 2501-194 piggy-back adapter
     • (2) compression platen
     • (1) 2810-206 3-point bend fixture
     • (1) Bluehill 3 software - Classroom Edition
     • (1) computer
     • (1) computer table
     • laboratory compressed-air supply
2. torsion
   • (2) Instron MT10 torsion tester
   • (2) Partner Torsion Software
   • (2) computer
   • (2) computer table
3. hardness
   • (3) Rockwell 574R Hardness Tester
   • Rockwell accessories
     • (3) flat anvil
     • (1) v anvil - 1.5 inch
     • (3) floor stand
   • Rockwell indenters and test blocks
     • (3) 1/16" indenter
     • (1) 1/2" indenter
     • (2) C-scale indenter
     • B-scale test blocks
     • C-scale test block
   • (1) Brinell BH3000 Hardness Tester
   • Brinell accessories
     • (1) flat anvil - large
     • (1) V-anvil - extra large
     • (1) Brinell microscope
     • (1) floor stand
   • Brinell indenters and test blocks
     • (1) 10 mm indenter
     • (1) calibration block
   • (2) Shore A Analog Durometer
   • (2) Shore D Analog Durometer
4. pressure
   • (1) thin-wall vessel
   • (1) thick-wall vessel
5. strain
   • (4) P3 Vishay strain indicator and recorder
   • strain gages
   • installation supplies
6. miscellaneous
   • (8) calipers
   • (4) tape measures
   • (4) 0.001" dial indicators and stands
   • (4) fixture and specimen cabinets
   • various dead weights and weight hangers
   • raw materials for specimens
   • machine shop capable of making fixtures and specimens