Do NOT try to adjust coil in pipet tip!
Wrapping
the detector coil
(Detail of Cu
coil winding.)
1.Hold
here with thumb while winding 18-20
turns
around the pipet. Do NOT use the Coil
Adjusting Tool for this step.*Do not leave any gaps between turns.
2.
Bend so mounting post is centered in coil
using the Coil
Adjusting Tool**
End View
Pipet
**Coil
Adjusting Tools are located in the Hood.
(Please
return them to the Hood as soon as your are finished with them.)
Side View